Intech Alarm Pocket Dosimeter

Features:
–   Based on semiconductor diode detector

– Convenient PEN-type design

– Easy to read large LCD display (back lit display optional)

Simple 1-button operation

– USB interface for PC connection for data setting / transfer

– Light weight – less than 70gm

– Storage of accumulated dose at power off & dose at every half hour

– Loud, audible Dose / dose rate alarms;

– Excellent immunity to EMI – unaffected by Mobile phones in close proximity

– Switch off option – either through the button on the device or through PC

– Over 4000 hrs of battery life (without excessive alarm)

Radiological
Measurement : Hp (10) individual dose eq. and dose rate eq.
Radiation detected : X and γ radiation
Display Units : Direct readout of dose equivalent  Hp(10) in Sv
Range Dose : 1μSv to >1Sv auto ranging; 10Sv overload
Dose rate : 0.1mSv/h to 1Sv/h, auto ranging (10Sv/h overload)
Alarms : Dose and dose rate alarms
: continuously settable over the entire range
: 80 dB buzzer – intermittent long beeps for dose alarm
: intermittent short beeps for dose rate alarm
Energy response (BARC Tested) : Type A :±25%  from 50keV to 7MeV (ref. 137Cs)
Angular response (BARC Tested) : ±15% up to ±60° for 137Cs
Accuracy : Hp(10) 137Cs ±10%
Dose rate linearity (BARC Tested) : ±20%  upto 1Sv/h
Overload ( (BARC Tested) : up to 10 Sv
Memory
Memory Type : EEPROM, 10 years retention
Dose profile history : Fixed, 30 mts intervals
No. of records : 24
Electrical and Mechanical
Power supply : single Li Coin CR2477 battery
Battery Life : Over 4000 hrs of continuous operation
  (non – alarming) – about 6 months.
: Over 2 years with 8 Hrs of use per day / 5 days a week
Communications : Direct USB or  IR wireless (optional) with Reader
Display and function : Control by a single button; On/Off, dose / dose rate
  display, mute.
Size : Pen type enclosure 30mm x 130mm x 15mm with
  Silicone sleeve
Weight : <70 gm including battery and clip
Case material : high impact ABS
Environmental
Operating temperature : -10 °C to 50 °C
Humidity : 20% to 90% RH, non-condensing
Vibration & shock resistant : Yes
Drop resistant : 1.5m drop on each surface onto concrete
EMC                                       : Exceeds IEC / ANSI requirements;
immune to cell phones in close proximity